Motec PWC Plug-In ECU Manual de usuario descargar pdf (Pagina 17)

10 Kawasaki Installation

The Ignition Module is fitted to the Ignition Mounting Plate.

Note: This module

generates significant heat and requires the use of

dielectric grease between the module and mounting plate to ensure proper

heat transfer. Firm fixing of the mounting bolts is also necessary for proper

heat transfer.

The mounted module/plate assembly is

placed on the underside of

the M400 mounting bolts, behind the ECU mounting bracket. Nylock nuts are

then used to secure the ignition assembly.

Due to the extra weight of the combined assembly there are 4 extra mounting

bolts and nuts supplied to bolt the

factory plastic support bracket back into the

ski.

These bolts take the place of the plastic push lock clips that are used by

Kawasaki.

Output Test Function

To test if all outputs are correctly wired to the relevant injectors and coils, the

ECU Manager so

ftware has an output test function available. If you would like

to use this function in a Kawasaki installation refer to the notes in the

Appendices ( Output Test Function).

MoTeC