Motec PWC Plug-In ECU Manual de usuario descargar pdf (Pagina 51)

44 Appendices

Note 2 – Calibration Tables

For the following pins the calibration table is available in the provided

Maps.

M400 Pin Yamaha Pin Function

AT1 B03 P15 Air Temperature

AT2 B04 P23 Engine Temperature

AT3 B05 P13 Muffler Water Temperature

AT4 B06 S27 Oil Pressure Switch

AT5 B07 S12 Engine Temperature Switch

AV6 B20 P16 Manifold Pressure Sensor

Note 3 - AT6

Reverse Switch and Dual RPM Limit

The Yamaha Base Maps

include a Rev Limiting function which is activated

when the Reverse Switch is engaged on the craft. If

this switch malfunctions,

or if the switch is not installed, the Dual RPM limit of 4000

rpm may be

permanently engaged.

If your ski appears to limit revs at 4000 rpm, first check

the wiring and fitment

of the Reverse Switch and then check the operation.

The Reverse Switch is wired via harness c

onnector P18 to pin B19 on the

M400 Marine ECU.

In ECU Manager software, this appears in Digital

Input Functions

(AT6).

To check the Reverse Switch operation

1. On the View menu, click Raw Input Values.

2. Click the AT tab and check the AT6 value.

For normal operation (non-reverse), AT6 should be

approx

0.03 volts. When the reverse switch is engaged,

AT6 should

approximately 4.95 volts.

If this is not the case, you can

disable the Dual RPM Limit function

the Base Map.

To disable the Dual RPM Limit

1. On the Adjust menu, click Digital Input Functions.

2. Click Sw In 6 (AT6) - Dual RPM and then click

Function

3. Enter 0 (zero).

4. Press R to restart the ECU, or power cycle the ECU.

MoTeC

For the following pins the calibration table is available in the provided

Base

Reverse Switch and Dual RPM Limit

include a Rev Limiting function which is activated

this switch malfunctions,

rpm may be

the wiring and fitment

onnector P18 to pin B19 on the

Input Functions

as Sw In 6

approx

imately

AT6 should

disable the Dual RPM Limit function

from

Function

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 90 91

Comentarios a estos manuales

Sin comentarios

Motec PWC Plug-In ECU Manual de usuario Pagina 51

Comentarios a estos manuales